Ken-Bar D-811
D811
This is the D-811 by Ken-Bar Go Karts. This go kart has a Tecumseh 6.0 hp engine, 2 pedals, Torque Converter, Live Axle, 6″ disc brakes, two rear wheel drive, 6″ & 8″ tires, double seat with 7″ adjustable slide, and 22.5 mph
top speed.
Ken Bar D811
Pull Start
Ken Bar D812E
Electric Start
Specifications
|
|
Engine Type
|
Tecumseh power sport 4-cycle, OHV, air cooled, gas powered engine |
Displacement | 195 cc (11.88 cu in) |
Average Speed | 26 mph |
Horse Power | 6 HP |
Ignition | Ignition CDI electronic |
Starting | Pull Recoil Starter |
Rear Axle | Two wheel drive live axle unit – two rear wheels drive |
Clutch | Centrifugal |
Front Tire | 15 X 600 X 6 |
Rear Tire | 16 X 750 X 8 – aggressive tread |
Brakes | 6″ Disc Brake |
Seat | Adjustable double padded sliding for two individual |
Seat Adjustment | Adjustable 7″; Distance to peddles 29″ – 36″ |
Overall Dimensions
Length x Width x Height |
66″ x 45 1/2″ x 52″ |
Ground Clearance | 7″ |
Dry Weight | 330 lbs |
Additional Features | Metal guard a shield between the seat and engine Rear cover with fenders rear heavy gauge ABS plastic cover guard keeps the go-kart occupants cleaner and dryer, as mud or dirt can “kick up” when karting. The rear cover adorns the rear of this go kart. The large rear fenders help keep grass and dirt away from the driver and passenger. Side guard side panels help protect the occupantsAll ball bearing (front & rear) This gives longer life and the hi-speed sealed bearings never need lubrication |
Engine stop switch by steering wheel & on side of engineSafety FeaturesSafety video included with kart
Seat belt (adjustable)
Foam padded brush bars helps to protect the occupants against tree limbs.
Safety flag
One free helmet included with kartFrameThick-walled steel strong 1″ 11 gauge high quality steel tube
Heavy gauge (thicker) frame most kart frames look the same from the outside, but there are major differences.
Ken-Bar frames are made from extra-heavy duty 11 gauge steel. Many manufacturers use 14 or 16 gauge (the higher the number, the thinner it is), and some even use 18 gauge.
All jig welded frames for accuracy
Finish baked – on polyurethane powder coatWarrantyOne year limited warrantyRecommended Ages8-12 Years