|
Your ATV requires
a break-In period just as with all other internal combustion engines.
This period allows the engine parts to seat and wear properly without undue
strain which can cause premature failure.
-
For the first
two weeks of operation do not run your ATV at full throttle for extended
periods of time.
-
Viper
50M/50/70/90/90R: Your first tank of fuel should be a pre-mixture of fuel and
oil at a 50:1 ratio. This will insure that the oil pump system has been primed
and bled of air that may have occurred in shipping.
-
Viper Jr:
All fuel should be a pre-mixture of fuel and oil at a 50:1 ratio.
-
Do not operate
the unit at more than 85% of maximum speed.
-
Do not over rev
the engine.
-
Use light
braking pressure to allow the brake pads to seat to the rotor and drums.
| 
Go-Karts
