|
Support |
|
|
| |
|
Little Bug II
 |
This is the Little Bug II D-423 by Ken-Bar Go Karts. This black, go
kart has a Tecumseh 4.0 hp engine, Centrifugal Clutch, Live Axle, 2
pedals, 2 rear wheel drive and 12.5 mph top speed.
|
|
|
|
Specifications
|
|
Engine Type
|
Tecumseh power sport
4-cycle, air cooled, gas powered engine |
|
Displacement |
156 cc (9.53 cu in) |
|
Average Speed |
12.5 mph |
|
Horse Power |
4 HP |
|
Ignition |
Ignition CDI
electronic |
|
Starting |
Pull Recoil Starter |
|
Rear Axle |
Live axle unit - two
rear wheels drive |
|
Clutch |
Centrifugal |
|
Front Tire |
410 / 350 X 4" |
|
Rear Tire |
410 / 350 X 4" |
|
Brakes |
Band |
|
Seat |
Double padded for two individuals |
|
Seat Adjustment |
Adjustable pedals
distance to pedals 24 1/2" TO 29 1/2" |
|
Overall Dimensions
Length x Width x Height |
62" x 38" x 41" |
|
Ground Clearance |
3 1/2" |
|
Dry Weight |
189 lbs |
|
Additional Features |
All ball bearing (front & rear) This gives
longer life and the hi-speed sealed bearings never need lubrication
Engine stop switch by steering wheel & on side
of engine |
|
Safety Features |
Safety video included with kart
Seat belt (adjustable)
Foam padded brush bars helps to protect the
occupants against tree limbs.
Safety flag
One free helmet included with kart |
|
Frame |
Thick-walled steel
strong 1" 11 gauge high quality steel tube
Heavy gauge
(thicker) frame most kart frames look the same
from the outside, but there are major
differences.
Ken-Bar frames are
made from extra-heavy duty 11 gauge steel. Many
manufacturers use 14 or 16 gauge (the higher the
number, the thinner it is), and some even use 18
gauge.
All jig welded
frames for accuracy
Finish baked - on
polyurethane powder coat |
|
Warranty |
One year limited
warranty |
|
|
