|
Support |
|
|
| |
|
S465
 |
This is the S-465 by Ken-Bar Go Karts. This red, single seat go art
has a Tecumseh 6.0 hp engine, Centrifugal Live Drive/Axle, Band
Brake, Stub Rear Axle, single adjust seat with 7" slide, 48 5/8"
wheel base, and 6" tires.
|
|
|
|
Specifications
|
|
Engine Type
|
Tecumseh power sport
4-cycle, air cooled, gas powered engine |
|
Displacement |
172 cc (10.49 cu in) |
|
Average Speed |
25 mph |
|
Horse Power |
6 HP |
|
Ignition |
Ignition CDI
electronic |
|
Starting |
Pull Recoil Starter |
|
Rear Axle |
Two wheel drive live
axle unit - both rear wheels pull |
|
Clutch |
Centrifugal |
|
Front Tire |
13 / 500 X 6" |
|
Rear Tire |
13 / 500 X 6" |
|
Brakes |
Band |
|
Seat |
Single padded for one individual |
|
Seat Adjustment |
Finger tip control seat will slide back and forth
7" |
|
Seat to Pedal |
27 1/4" - 34 1/4" |
|
Overall Dimensions
Length x Width x Height |
62" x 38" x 43" |
|
Ground Clearance |
5 1/2" |
|
Dry Weight |
237 lbs |
|
Additional Features |
All ball bearing (front & rear) This gives
longer life and the hi-speed sealed bearings never need lubrication
Engine stop switch by steering wheel & on side
of engine |
|
Safety Features |
Safety video included with kart
Seat belt (adjustable)
Foam padded brush bars helps to protect the
occupants against tree limbs.
Safety flag
One free helmet included with kart |
|
Frame |
Thick-walled steel
strong 1" 11 gauge high quality steel tube
Heavy gauge
(thicker) frame most kart frames look the same
from the outside, but there are major
differences.
Ken-Bar frames are
made from extra-heavy duty 11 gauge steel. Many
manufacturers use 14 or 16 gauge (the higher the
number, the thinner it is), and some even use 18
gauge.
All jig welded
frames for accuracy
Finish baked - on
polyurethane powder coat |
|
Warranty |
One year limited
warranty |
|
Recommended Ages |
8-18 Years |
|
|
