|
Support |
|
|
| |
|
D665
 |
This is the Maverick D-665 by Ken-Bar Go Karts. This
red go kart has a Tecumseh 6.0 hp engine, 2 pedals, Centrifugal
Clutch, stub Axle, band brake, single wheel drive, 6" tires, double
seat with 7" adjustable slide, and 22.5 mph top speed.
|
|
|
|
Specifications
|
|
Engine Type
|
Tecumseh power sport
4-cycle, air cooled, gas powered engine |
|
Displacement |
172 cc (10.49 cu in) |
|
Average Speed |
24 mph |
|
Horse Power |
6 HP |
|
Ignition |
Ignition CDI
electronic |
|
Starting |
Pull Recoil Starter |
|
Rear Axle |
Single wheel drive, The engine drives one rear
wheel so the go-kart which will handle tight
turns easily |
|
Clutch |
Centrifugal |
|
Front Tire |
13 / 500 X 6" |
|
Rear Tire |
13 / 500 X 6" |
|
Brakes |
Band |
|
Seat |
Adjustable double
padded sliding for two individual |
|
Seat Adjustment |
Adjustable 7";
Distance to peddles 28" - 35" |
|
Overall Dimensions
Length x Width x Height |
65" x 42" x 45" |
|
Ground Clearance |
5 3/4" |
|
Dry Weight |
243 lbs |
|
Additional Features |
All ball bearing (front & rear) This gives
longer life and the hi-speed sealed bearings never need lubrication
Engine stop switch by steering wheel & on side
of engine |
|
Safety Features |
Safety video included with kart
Seat belt (adjustable)
Foam padded brush bars helps to protect the
occupants against tree limbs.
Safety flag
One free helmet included with kart |
|
Frame |
Thick-walled steel
strong 1" 11 gauge high quality steel tube
Heavy gauge
(thicker) frame most kart frames look the same
from the outside, but there are major
differences.
Ken-Bar frames are
made from extra-heavy duty 11 gauge steel. Many
manufacturers use 14 or 16 gauge (the higher the
number, the thinner it is), and some even use 18
gauge.
All jig welded
frames for accuracy
Finish baked - on
polyurethane powder coat |
|
Warranty |
One year limited
warranty |
|
Recommended Ages |
8-12 Years |
|
|
