|
Support |
|
|
| |
|
D711
 |
This is the D-711 by Ken-Bar Go Karts. This black, single seat go
kart has a Tecumseh 6.0 hp engine, Centrifugal Live Drive/Axle, Band
Brake, Stub Rear Axle, double adjust seat with 7" slide, 48 5/8"
wheel base, and 6" tires.
|
|
|
|
Specifications
|
|
Engine Type
|
Tecumseh power sport
4-cycle, OHV, air cooled, gas powered engine |
|
Displacement |
195 cc (11.88 cu in) |
|
Average Speed |
26 mph |
|
Horse Power |
6 HP |
|
Ignition |
Ignition CDI
electronic |
|
Starting |
Pull Recoil Starter |
|
Rear Axle |
Two wheel drive live
axle unit - two rear wheels drive |
|
Clutch |
Centrifugal |
|
Front Tire |
13 / 500 X 6" |
|
Rear Tire |
13 / 500 X 6" |
|
Brakes |
Band |
|
Seat |
Adjustable double
padded sliding for two individual |
|
Seat Adjustment |
Adjustable 7";
Distance to peddles 29" - 36" |
|
Overall Dimensions
Length x Width x Height |
66" x 43" x 50" |
|
Ground Clearance |
6" |
|
Dry Weight |
304 lbs |
|
Additional Features |
Metal guard a shield between the seat and engine
Rear cover with fenders rear heavy gauge ABS
plastic cover guard keeps the go-kart occupants cleaner and dryer, as mud or
dirt can "kick up" when karting.
The rear cover adorns the rear of this go kart.
The large rear fenders help keep grass and dirt away from the driver and
passenger.
Side guard side panels help protect the
occupantsAll ball bearing (front & rear) This gives
longer life and the hi-speed sealed bearings never need lubrication
Engine stop switch by steering wheel & on side
of engine |
|
Safety Features |
Safety video included with kart
Seat belt (adjustable)
Foam padded brush bars helps to protect the
occupants against tree limbs.
Safety flag
One free helmet included with kart |
|
Frame |
Thick-walled steel
strong 1" 11 gauge high quality steel tube
Heavy gauge
(thicker) frame most kart frames look the same
from the outside, but there are major
differences.
Ken-Bar frames are
made from extra-heavy duty 11 gauge steel. Many
manufacturers use 14 or 16 gauge (the higher the
number, the thinner it is), and some even use 18
gauge.
All jig welded
frames for accuracy
Finish baked - on
polyurethane powder coat |
|
Warranty |
One year limited
warranty |
|
Recommended Ages |
8-12 Years |
|
|
